Technical Checklist Before Installing AC: Electrical, Drain and Pipework
Before installing AC in Madrid, verify the electrical line, circuit breaker, RCD, drain and pipe route. Complete checklist to prevent breakdowns and extra costs.

An air conditioning installation doesn't start with drilling a wall, but with a prior technical verification. In Madrid, where many buildings have old electrical installations, shared false ceilings and communal drains, skipping this checklist causes breakdowns, extra costs and delays. Before installing, a certified technician must check three areas: electrical, drainage and pipework.
Block 1: Electrical installation
Air conditioning is one of the highest-demand appliances. Connecting it to an insufficient electrical line is the number one cause of RCD tripping and premature compressor failure.
| Element | What to check | Minimum specification |
|---|---|---|
| Dedicated line | AC must have its own circuit, not shared with kitchen or washing machine | Dedicated line with 2.5 mm² cable minimum |
| Circuit breaker | Automatic breaker capacity | 16A for units up to 3,500 frigories; 20A or 25A for larger units |
| RCD | Residual current device sensitivity | 30 mA type AC or, preferably, type A |
| Power socket | Condition and type of plug near indoor unit | 16A socket with earth, in good condition |
| Electrical panel | Available space for a new circuit breaker | At least one free slot in the panel |
In older buildings in central Madrid (Malasaña, Lavapiés, Chamberí), it's common to find saturated electrical panels or undersized wiring (1.5 mm²). In these cases, the technician must install a new line from the panel to the split's connection point, which increases installation time but prevents serious safety issues.
Block 2: Condensate drainage
Every air conditioner generates condensation water when cooling. This water must be evacuated continuously and safely. Poor drainage management causes wall damp, ceiling stains on neighbours' properties and odours.
- Drain point location: The drain must connect to a floor drain, bathroom drain or rainwater downpipe. Never to the sewage network.
- Minimum slope: At least 2% continuous slope from the split's tray to the discharge point. Without slope, water stagnates and causes mould and odours.
- Anti-return trap: If the drain connects to a communal downpipe, it must include a trap to prevent sewer odours from rising through the pipe.
- Insulated drain pipe: On sections passing through warm areas (unconditioned false ceiling), the pipe must be thermally insulated to prevent condensation on the pipe itself.
In flats with false ceilings, the drain is usually hidden. In installations without false ceilings, the pipe must run inside the wall or through a technical corner with a channel. It should never be visible on the main face of the wall.
Block 3: Refrigerant pipework route
The pipes connecting the indoor and outdoor units carry refrigerant gas at high pressure. The route should be as short and straight as possible to minimise performance loss and leak risk.
| Factor | Recommendation |
|---|---|
| Maximum distance | Up to 15 metres without extra cost; over 15 m requires additional refrigerant charge |
| Maximum height difference | Up to 7-8 metres between indoor and outdoor unit |
| Wall penetration | Drill with downward slope (2-3°) so the drain works by gravity |
| Pipe protection | Aluminium armour and insulating tape on the entire external section |
| Outdoor unit | Anti-vibration bracket anchored to wall or facade, with maintenance access |
Planning to install AC in Madrid?
We verify electrical, drainage and pipe routing before starting. F-Gas certified installation, fixed quote and 2-year warranty.
WhatsApp: I want a safe installationSigns your electrical installation isn't ready
If you notice any of these symptoms in your home, you likely need to reinforce the electrical installation before installing air conditioning:
- The RCD trips when several appliances are connected at once.
- Sockets or switches heat up when using high-consumption devices.
- The electrical panel is old (with ceramic fuses instead of circuit breakers).
- There are no free slots in the panel for a new circuit.
- Visible wiring is 1.5 mm² or smaller.
In these cases, the installer must replace the line or expand the panel before connecting the unit. It's not an optional extra cost: it's a safety requirement. For more information on electrical issues with air conditioning, see our guide on why air conditioning trips the RCD in Madrid.
Final checklist before installation
On installation day, the technician must confirm:
- Dedicated electrical line with correct breaker and RCD.
- Earth connection in good condition.
- Accessible drain point with minimum 2% slope.
- Pipe route planned and approved by the owner.
- Community permissions for the outdoor unit (if applicable).
- Clear space on the facade or patio for the outdoor unit bracket.
- Access to the false ceiling if the installation is ducted.
Frequently Asked Questions
Do I need an electrician before installing air conditioning?
If the electrical installation is modern and has an available line, it's not necessary. If the panel is saturated or the wiring is old, the HVAC installer can reinforce the line or, in complex cases, coordinate with an electrician.
What happens if the drain doesn't have enough slope?
Water stagnates in the split's tray, causing odours, mould growth and eventually dripping onto the wall or floor. The installer must correct the slope or install a drain pump if there isn't enough gravity.
Can I extend the pipes beyond 15 metres?
Yes, but beyond 15 metres the unit's performance decreases and an additional refrigerant charge is needed. Each manufacturer specifies the maximum recommended distance for each model.
Does the outdoor unit need a special bracket?
Yes. The bracket must be made of weather-resistant material (galvanised steel or aluminium), anchored with chemical anchors to the wall and fitted with anti-vibration dampers to avoid transmitting noise to the home.
Related Articles

Ducted vs Split Systems: Which is Best for Your Home in Madrid?
We provide a detailed comparison of ducted and split air conditioning systems to help you decide the best climate control option for your Madrid property.

What to Expect During a Professional AC Installation
Learn the step-by-step process of how our technicians install your new climate control system cleanly, safely, and efficiently.

Split vs Multi-Split: Which to Install in Your Madrid Home?
Discover the key differences and which is the best option for cooling your apartment, penthouse, or villa.
