AC Not Turning On After a Power Cut in Madrid: Causes and Fixes
After a power outage or voltage spike, your AC may not turn on due to compressor protection mode, a tripped breaker, or a damaged capacitor. Here's what to check before calling a technician.

Power cuts are common in Madrid during heatwaves, when the grid experiences consumption spikes. After an outage, it's very common for your air conditioner not to respond when you try to turn it on. In most cases this isn't a serious fault, but rather the unit's own protection system or a tripped breaker. Here's what to check yourself and when you need to call a technician.
Why Your AC Won't Turn On After a Power Cut
Modern air conditioners, especially inverter systems from brands like Daikin or Mitsubishi Electric, incorporate a compressor protection system that blocks startup for 3 to 5 minutes after a power loss. This prevents damage from hot starts with residual pressure in the refrigerant circuit. If you wait 5 minutes and the unit still doesn't start, there are other possible causes.
Most Common Causes
- Compressor in protection mode (startup delay): The system waits 3-5 minutes before reactivating. This is completely normal and doesn't indicate a fault.
- Tripped RCD or MCB: A power cut or voltage spike can trip the residual current device (RCD) in your home's electrical panel. Check the panel and see if the breaker for the AC circuit is down.
- Damaged start capacitor: Voltage spikes are the number one cause of burnt capacitors. The unit clicks when you turn it on but the fan doesn't spin and the compressor doesn't start.
- Blown fuse on the control board: The indoor or outdoor unit's control board may have taken a voltage spike that blew the protective fuse.
- Manual reset needed: Some models require a manual reset after a prolonged outage: unplug the unit for 30 seconds, plug it back in, and try again.
- Dead remote control batteries: It seems trivial, but a long outage doesn't affect the remote. If batteries were at their limit, the remote may stop working just when you try to reactivate the unit.
- Temperature sensor damaged by the spike: Less common, but a voltage spike can damage the indoor unit's temperature sensor, preventing the unit from interpreting the start command.
What You Can Check Yourself
| Check | What to do |
|---|---|
| Wait 5 minutes | The compressor has a safety delay. Wait and try again |
| Electrical panel | Check that the RCD and MCB for the AC circuit are up |
| Reset the unit | Unplug for 30 seconds, reconnect, and try with the remote |
| Remote batteries | Replace the remote control batteries with fresh ones |
| Indoor unit display | If no lights or display, the problem is electrical (power or board) |
| Noise when starting | If you hear a "click" but the fan doesn't spin, suspect the capacitor |
Is your AC not turning on after a power cut in Madrid?
If you've checked the panel, reset the unit, and it still won't work, the capacitor or control board most likely took the voltage spike. Our technicians can diagnose the fault in a single visit.
WhatsApp: Startup diagnosisThe Start Capacitor: The Most Common Fault After a Voltage Spike
The capacitor is a small, inexpensive component (€15-€40) that gives the compressor the electrical boost it needs to start. When a voltage spike damages it, the compressor can't overcome inertia and the unit won't cool. The classic symptom is a hum or click from the outdoor unit with the fan not spinning. It's a quick repair that a certified technician can resolve in one visit, but it should not be attempted without electrical knowledge, as the capacitor holds a charge even when disconnected.
When to Call a Professional
- If you've waited 5 minutes, reset the unit, checked the panel, and it still won't turn on.
- If the outdoor unit makes noise but doesn't start (suspect capacitor).
- If the indoor unit display doesn't light up (possible damaged control board).
- If the RCD trips repeatedly when you try to turn on the AC (possible short circuit in the unit).
In all these cases, a scheduled diagnostic visit (€60 + VAT) lets us pinpoint the problem and fix it with a fixed-price quote. Immediate or emergency attendance costs €120 + VAT.
Frequently Asked Questions
Can I reset the AC by unplugging it?
Yes, unplugging the unit for 30-60 seconds and reconnecting is a full reset that resolves many software issues after a power cut. It doesn't damage the unit.
Does a surge protector prevent AC damage?
A surge protector or UPS can help protect the control board, but it doesn't protect the start capacitor, which is the component most vulnerable to voltage spikes.
How much does it cost to repair a start capacitor?
The component is inexpensive, but the total cost depends on travel and labor. A scheduled diagnostic visit costs €60 + VAT and immediate attendance €120 + VAT. After diagnosis, we give you a fixed quote for the repair.
Do you serve Toledo?
Yes, we cover Toledo with travel from Madrid, with no travel surcharge. Contact us to check availability.
Related Articles

Why Your Air Conditioning Trips the Circuit Breaker in Madrid
Discover the most common reasons why your air conditioning cuts off the power and what steps you should take to fix the fault.

Why is My AC Leaking Water?
Water leaks are the most common summer breakdown. Learn the causes and how to fix it quickly.

AC Not Cooling? Here are the Most Common Causes
Find out why your AC is blowing room-temperature air, the main culprits behind this breakdown, and what to do about it.
