Back to Blog
Installation
August 20, 2026
9 min

How to Calculate AC Capacity for a Hot Attic Penthouse in Madrid

Madrid penthouses suffer extreme temperatures from direct roof sun exposure. Learn how to calculate the required cooling capacity and choose the right unit.

How to Calculate AC Capacity for a Hot Attic Penthouse in Madrid

A penthouse attic in Madrid during July can reach indoor temperatures above 38 °C. Direct sun exposure on the roof, combined with large windows and the thermal inertia of the ceiling, turns these apartments into real greenhouses. Correctly calculating the air conditioning capacity (measured in frigorías or thermal kW) is essential to avoid underpowering or oversizing the unit and wasting energy.

What are frigorías and why they matter

A frigoría is the unit of cooling power. A domestic air conditioning unit typically ranges from 2,000 to 9,000 frigorías. In the international system, it's expressed in thermal kW: 1 frigoría equals approximately 1.163 thermal watts. To size a unit you need to estimate the space's thermal load, meaning the amount of heat the AC must extract to maintain a comfortable temperature (24-26 °C).

The base calculation: 100-130 frigorías per m²

The general rule for a standard home in Madrid is to calculate between 100 and 130 frigorías per square meter. However, a penthouse is not a standard home. The sun-exposed roof significantly increases the thermal load. For a Madrid penthouse we recommend:

  • Penthouse with insulated roof and north orientation: 120-140 frigorías/m²
  • Penthouse with sun-exposed roof and south/west orientation: 150-180 frigorías/m²
  • Penthouse with large south-facing windows: 160-200 frigorías/m²

Practical example: 70 m² penthouse in Chamberí

Imagine a 70 m² penthouse in Chamberí, with a sun-exposed roof and a west-facing window. It receives direct sun from mid-afternoon to sunset, exactly the hottest hours of the day.

Parameter Value
Surface area70 m²
Frigorías/m² factor170 (exposed penthouse, west)
Estimated thermal load70 × 170 = 11,900 frigorías
Recommended unit12,000 frigorías (minimum)
Equivalent in thermal kW~13.9 kW

In this case, a 9,000 frigoría unit (common in standard apartments) would be insufficient. You'd need a 12,000 frigoría unit or two complementary units (for example, a 10,000 ducted unit in the living room and a 3,500 split in the bedroom).

Factors that increase thermal load in a penthouse

It's not enough to multiply square meters by a fixed factor. These elements increase the required capacity:

  • Uninsulated or poorly insulated roof: The roof absorbs heat all day and releases it indoors at night.
  • South or west orientation: Hours of direct sun on windows and roof contribute the most heat.
  • Large windows or skylights: Glass has worse insulation than walls. Roof skylights are especially critical.
  • Top floors without shade: A sixth-floor penthouse with no shading buildings receives more radiation than a lower floor.
  • High occupancy: Each person contributes approximately 100 watts of sensible heat.
  • Appliances and lighting: An open kitchen next to the living room adds thermal load.

Is your Madrid penthouse not cooling enough?

We visit your penthouse at no cost and calculate the exact capacity you need. Fixed-price quote and high-efficiency units with a 2-year warranty.

WhatsApp: Calculate capacity for my penthouse

Ducted or split for a penthouse

In penthouses with false ceilings, a ducted system allows even distribution of cold air and hides indoor units. If the penthouse has sloped ceilings or exposed beams, a wall split or ceiling cassette may be more practical. The choice depends on available height, layout, and budget.

For penthouses with several separate rooms, check our guide on multisplit vs individual 1x1 units to decide the best configuration.

Signs your penthouse is overheating

You can check if your penthouse has a thermal load problem without a technician:

  • The AC runs continuously but the temperature doesn't drop below 27-28 °C.
  • The unit short-cycles: turns on and off every few minutes (oversized).
  • The ceiling is hot to the touch even at night (lack of insulation).
  • Electricity consumption spikes in summer.

If you notice any of these symptoms, the unit may be incorrectly sized or the penthouse may need insulation improvements. A professional can measure the actual thermal load and recommend the right solution.

When to call a professional

The frigoría calculation is an estimate. A certified technician performs a complete thermal study that includes orientation, roof materials, insulation level, windows, and occupancy. At AirPro Madrid we offer this calculation visit at no cost when the installation is contracted.

Frequently Asked Questions

How many frigorías do I need for a 50 m² penthouse in Madrid?

For a 50 m² penthouse with a sun-exposed roof, you'd need between 7,500 and 9,000 frigorías depending on orientation and insulation. A 9,000 frigoría unit covers most scenarios for small Madrid penthouses.

Does a more powerful unit consume more electricity?

Not necessarily. A correctly sized Inverter unit modulates its power and consumes only what's needed. An oversized unit short-cycles and consumes more. An undersized unit never stops and also consumes more. Correct sizing is key for efficiency.

Does roof insulation reduce the required capacity?

Yes. Improving roof insulation can reduce the thermal load by 20% to 40%, allowing you to install a smaller unit and save on electricity consumption. It's the recommended first investment before changing the AC.

Can I install two splits in a penthouse instead of one large unit?

Yes. Two splits (for example, one in the living room and one in the bedroom) allow zoning consumption and improving redundancy. If one unit fails, the other keeps running. It's a valid option for penthouses with clearly separate rooms.